Clean lines, a disc of steel at the pommel and a long fullered blade: this 40" broadsword takes its look from the knightly swords of high medieval Europe. The blade is hand-forged from 1095 high carbon steel, heat treated and sharpened, and the sword ships with a fitted leather scabbard.
See every style in our broadsword collection, or compare it with the 39" Damascus steel broadsword for a pattern-welded blade in similar medieval proportions.
1095 High Carbon Steel
1095 is one of the most trusted steels in blade making. Its carbon content of about 0.95% lets it reach high hardness in heat treatment and hold a keen edge. Each blade is brought to critical temperature and quenched to harden the steel, then tempered to relieve internal stress and add the toughness a long blade needs. The result is a sword that takes a real edge without the brittleness of steel left untempered.
The Blade
The double-edged blade tapers steadily to a defined point, with a central fuller running most of its length. The fuller lightens the blade and stiffens it without adding weight, which helps a sword of this length feel balanced rather than blade-heavy. The satin finish lets the clean geometry speak for itself.
The Hilt
-
Crossguard: A straight steel cross with flared, squared ends, the classic cruciform shape of the medieval knight's sword.
-
Grip: Dark brown leather wrapped over raised risers for a secure, textured hold.
-
Pommel: A stepped steel wheel pommel with a raised center boss. Wheel pommels were among the most common forms in Europe from roughly the 11th to the 15th century, and they counterbalance the blade.
Hand-Forged Construction
This is a battle-ready build in the construction sense: forged high carbon steel, a full quench and temper, a sharpened edge and a properly fitted hilt. It is the opposite of a wall hanger with a soft blade and a decorative pin.
Fitted Leather Scabbard
A brown leather scabbard shaped to the blade is included for transport and display. Leather holds moisture, so for long-term storage keep the blade oiled and out of the scabbard.
The Medieval Broadsword
"Broadsword" is a collector's term more than a medieval one. In the Middle Ages, a straight, double-edged sword with a cruciform hilt was simply a sword, carried by knights and men-at-arms across Europe. The word broadsword came later, when wide cutting blades needed a name to set them apart from the slender rapier and smallsword. Today it describes straight European swords with a substantial blade, and the medieval broadsword, with its cross guard and wheel pommel, is the form most people picture when they think of a knight's sword.
For a longer grip, browse our bastard swords and longswords, or see our 38" 1095 hand-and-a-half broadsword.
Specifications
-
Overall length: 40"
-
Blade material: 1095 high carbon steel
-
Heat treatment: Quenched and tempered
-
Blade profile: Double-edged, fullered, tapering point
-
Edge: Sharpened
-
Crossguard: Straight steel, flared ends
-
Grip: Brown leather over risers
-
Pommel: Steel wheel pommel
-
Weight (sword): approximately 3 lbs 6 oz
-
Included: Fitted leather scabbard
Sword Care
1095 is a carbon steel, not stainless, so it needs a little attention. Wipe the blade after handling to remove fingerprints and moisture, then apply a thin coat of mineral oil or sword oil. Store it somewhere dry and check it now and then for surface spots. Over time the steel may develop a patina, which many collectors value as part of a sword's character. Because the edge is sharpened, always wipe from spine to edge and store the sword out of reach of children.
Frequently Asked Questions
Is 1095 steel good for a sword?
Yes. 1095 is a proven high carbon steel used widely in swords and knives. Properly quenched and tempered, it holds a fine edge and has the toughness a long blade needs. Its one trade-off is that it is not stainless, so it should be kept clean and oiled.
How much does this broadsword weigh?
Approximately 3 lbs 6 oz, or about 3 lbs 13 oz in its scabbard. That is right in line with historical medieval swords, most of which weighed roughly 2.5 to 3.5 pounds.
Is the blade sharpened?
Yes. It ships with a sharpened, double-edged blade and should be handled and stored accordingly. Sales are limited to adults 18 and over.
What is a wheel pommel?
A wheel pommel is a round, disc-shaped pommel, often with a raised center, fitted at the end of the grip. It was one of the most widespread pommel styles on European swords through much of the Middle Ages, and it balances the weight of the blade.
What is the fuller on the blade for?
The fuller is the groove running down the center of the blade. It removes weight while keeping the blade stiff, so the sword feels lighter and livelier than a flat blade of the same size. It is sometimes mistakenly called a "blood groove," but its purpose is structural.
What is the difference between 1095 steel and Damascus steel?
1095 is a single high carbon steel with a clean, uniform finish. Our Damascus blades are forge-welded from 1095 and 15N20 and folded to 352 layers, which creates a visible flowing pattern. Both are hand-forged and heat treated. The choice mostly comes down to whether you prefer a classic plain steel look or a patterned blade.
Does it come with a scabbard?
Yes, a fitted brown leather scabbard is included. Use it for transport and display, and store the oiled blade outside it long-term.
